{"title":"Kent\/Furukawa FX35","description":null,"products":[{"product_id":"kent-furukawa-kf3-f3-fx35-fx35a-point-and-chisel","title":"Kent\/Furukawa KF3, F3, FX35, FX35A Point and Chisel","description":"\u003ch2\u003eOur points and chisels are a direct fit for the following models: Kent\/Furukawa KF3, F3, FX35, FX35A. The OEM part numbers are:\u003c\/h2\u003e\n\u003ctable width=\"100%\" style=\"height: 78.4px; width: 100.036%;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 15.6419%; height: 19.6px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"width: 18.6983%; height: 19.6px;\"\u003eSerial Number\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 19.6px;\"\u003eMoil Point\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 19.6px;\"\u003eChisel\u003c\/td\u003e\n\u003ctd style=\"width: 21.2154%; height: 19.6px;\"\u003eBlunt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"width: 15.6419%; height: 19.6px;\"\u003eKF3\u003c\/td\u003e\n\u003ctd style=\"width: 18.6983%; height: 19.6px;\"\u003e5001 - Up\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 19.6px;\"\u003eKF3-25115\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 19.6px;\"\u003eKF3-25114\u003c\/td\u003e\n\u003ctd style=\"width: 21.2154%; height: 19.6px;\"\u003eKF3-25111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 15.6419%; height: 39.2px;\"\u003eFX35\u003cbr\u003eFX35A\u003c\/td\u003e\n\u003ctd style=\"width: 18.6983%; height: 39.2px;\"\u003e1001 - Up\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 39.2px;\"\u003eF3-25113\u003cbr\u003eKF325115\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.575%; height: 39.2px;\"\u003eF3-25114\u003cbr\u003eKF325114\u003cbr\u003e\n\u003c\/td\u003e\n\u003ctd style=\"width: 21.2154%; height: 39.2px;\"\u003eF3-25111\u003cbr\u003eKF325111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis tool measures 2.03 inches in diameter and 20 inches in length.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePoints and chisels will do almost every job you need with a hydraulic breaker. From breaking rock to asphalt and pavement demolition, these tools will perform. Our tools are made of alloy steel. This steel is then heat-treated, making it hard and durable. The heat-treating process reaches the center of the tool for a long life.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.bighammerco.net\/pages\/hydraulic-points-chisels-use-tips\" target=\"_blank\"\u003eClick here For best practices using points and chisels.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBig Hammer Co is a direct replacement manufacturer for all our brands. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa Rock Drill (FRD). This product is a direct replacement part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/FRD brand or trademark is for the sole purpose of indicating compatibility or product fit and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/FRD and\/or the Kent\/ Furukawa Rock Drill Trademark.\u003c\/p\u003e","brand":"US-T","offers":[{"title":"Point","offer_id":16084216840281,"sku":"KF325115, F3-25115","price":352.0,"currency_code":"USD","in_stock":true},{"title":"Chisel","offer_id":16084216905817,"sku":"KF325114, F3-25114","price":352.0,"currency_code":"USD","in_stock":true},{"title":"Blunt","offer_id":48566256599210,"sku":"KF325111,  F3-25111","price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/BHC_FURUKAWAF3_FX35_KENTKF3.jpg?v=1725603219"},{"product_id":"kent-furukawa-fx35-socket-bolt","title":"Kent\/Furukawa FX35 Socket Bolt","description":"\u003ch2\u003eOur Socket Bolt is a direct fit for your Kent\/Furukawa FX35. The OEM part number is:\u003c\/h2\u003e\n\u003ctable width=\"100%\" data-mce-style=\"width: 100%; height: 224.556px;\"\u003e\n\u003ctbody\u003e\n\u003ctr data-mce-style=\"height: 19.5972px;\"\u003e\n\u003ctd data-mce-style=\"width: 41.0615%; height: 19.5972px;\"\u003eSerial Number\u003c\/td\u003e\n\u003ctd data-mce-style=\"width: 31.0345%; height: 19.5972px;\"\u003ePart Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-style=\"height: 39.2px;\"\u003e\n\u003ctd data-mce-style=\"width: 41.053%; height: 39.2px;\"\u003e1001 - Up\u003c\/td\u003e\n\u003ctd data-mce-style=\"width: 31.1119%; height: 39.2px;\"\u003e102032-18150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBig Hammer Co is a direct replacement manufacturer for all our brands. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is a direct replacement part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit and is not meant to imply any affiliation or relationship between Big Hammer Co. and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"Big Hammer Co","offers":[{"title":"Default Title","offer_id":45736113340586,"sku":"102032-18150","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Kent_Furukawa_FX35_Socket_Bolt.png?v=1739255351"},{"product_id":"kent-furukawa-fx35-seal-kit","title":"Kent\/Furukawa FX35 Seal Kit","description":"\u003ch2\u003eOur Seal Kit is a direct fit for your Kent\/Furukawa. The OEM part number is:\u003c\/h2\u003e\n\u003ctable width=\"100%\" data-mce-style=\"width: 100%; height: 224.556px;\"\u003e\n\u003ctbody\u003e\n\u003ctr data-mce-style=\"height: 19.5972px;\"\u003e\n\u003ctd style=\"width: 26.7636%;\" data-mce-style=\"width: 27.2882%; height: 19.5972px;\"\u003eModel\u003c\/td\u003e\n\u003ctd style=\"width: 36.6293%;\" data-mce-style=\"width: 41.0615%; height: 19.5972px;\"\u003eSerial Number\u003c\/td\u003e\n\u003ctd style=\"width: 36.0714%;\" data-mce-style=\"width: 31.0345%; height: 19.5972px;\"\u003ePart Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 26.7636%;\" data-mce-style=\"width: 27.2459%; height: 39.2px;\"\u003eFX35\u003c\/td\u003e\n\u003ctd style=\"width: 36.6293%;\" data-mce-style=\"width: 41.053%; height: 39.2px;\"\u003e1001 - Up\u003c\/td\u003e\n\u003ctd style=\"width: 36.0714%;\" data-mce-style=\"width: 31.1119%; height: 39.2px;\"\u003e902307-920010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOur seal kits are made to exact specifications and match OEM standards. A high-quality seal kit is a must for any rebuilt hydraulic hammer. Your seal kit should resist high and low temperatures and perform at its best in all cases. An inferior seal kit can wear out prematurely. Depending on the make and model of your hammer, your set kit may come with various sizes of O-rings, packings, and caps.\u003c\/p\u003e\n\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer of all the brands we sell. Big Hammer Co. is not endorsed sponsored by or associated with Kent\/Furukawa. \u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit and is not meant to imply any affiliation or relationship between Big Hammer Co. and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"IT-M","offers":[{"title":"Default Title","offer_id":45736187101354,"sku":"902307-920010","price":372.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Product_Images_2a0a7857-6ddc-42b1-bf77-3595fa00c513.png?v=1731927720"},{"product_id":"kent-furukawa-fx35-front-bushing","title":"Kent\/Furukawa FX35 Front Bushing","description":"\u003ch2\u003eOur Front Bushing is a direct fit for your Kent\/Furukawa FX35. The OEM part number is:\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Number\u003c\/td\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1001 - Up\u003c\/td\u003e\n\u003ctd\u003eHB3R-20103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eUpper and lower bushings are critical to keeping your hydraulic hammer running right. These bushings keep your point or chisel in place during work. Each bushing needs to be made to OEM standards to keep the correct profile and contours and correctly seat your working tool. When your lower or upper bushing is worn, your tool is not “Square” with the piston. This will lead to a cracked piston, cylinder damage, and seal damage.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBig Hammer Co is a direct replacement manufacturer for all our brands. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is a direct replacement part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit and is not meant to imply any affiliation or relationship between Big Hammer Co. and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"Big Hammer Co","offers":[{"title":"Default Title","offer_id":45737331556522,"sku":"HB3R-20103","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/KentFurukawa_FX35_Front_Bushing.png?v=1759707188"},{"product_id":"kent-furukawa-fx35-tool-retainer","title":"Kent\/Furukawa FX35 Tool Retainer","description":"\u003ch2\u003eOur Tool Retainers are a direct fit for your Kent\/Furukawa FX35. The OEM part number is:\u003c\/h2\u003e\n\u003ctable width=\"100%\" data-mce-style=\"width: 100%; height: 224.556px;\"\u003e\n\u003ctbody\u003e\n\u003ctr data-mce-style=\"height: 19.5972px;\"\u003e\n\u003ctd style=\"width: 48.6239%;\" data-mce-style=\"width: 41.0615%; height: 19.5972px;\"\u003eSerial Number\u003c\/td\u003e\n\u003ctd style=\"width: 50.945%;\" data-mce-style=\"width: 31.0345%; height: 19.5972px;\"\u003ePart Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"width: 48.6239%;\" data-mce-style=\"width: 41.053%; height: 39.2px;\"\u003e1001 - Up\u003c\/td\u003e\n\u003ctd style=\"width: 50.945%;\" data-mce-style=\"width: 31.1119%; height: 39.2px;\"\u003eF3-20206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-style=\"-en-clipboard: true;\"\u003eA tool retainer has an important job, keeping your point or chisel in the hammer. A Tool retainer needs to be heat treated properly or breakage can occur. Oftentimes, your tool retainer only needs replacing if you are blank-firing the tool. We recommend you keep this to a minimum to keep repair costs low. Misusing the breaker by Blank-firing leads to broken tools, tool retainers, bushings, and other problems.\u003c\/div\u003e\n\u003cdiv data-mce-style=\"-en-clipboard: true;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBig Hammer Co is a direct replacement manufacturer for all the brands we sell. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is a direct replacement part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit and is not meant to imply any affiliation or relationship between Big Hammer Co. and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"IT-I","offers":[{"title":"Default Title","offer_id":45737359442090,"sku":"F3-20206","price":110.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Kent_Furukawa_FX35_Rod_Pin.png?v=1723625443"},{"product_id":"kent-furukawa-fx35-lower-bushing","title":"Kent\/Furukawa FX35 Lower Bushing","description":"\u003ch2\u003eOur Lower \u0026amp; Upper Bushing are a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eUpper and lower bushings are critical to keeping your hydraulic hammer running right. These bushings keep your point or chisel in place during work. Each bushing needs to be made to OEM standards to keep the correct profile and contours and correctly seat your working tool. When your lower or upper bushing is worn, your tool is not “Square” with the piston. This will lead to a cracked piston, cylinder damage and seal damage.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371292508330,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Indeco_HB27_lower_2_eae12b38-8a44-4b0a-9000-b7417e655e61.png?v=1756394998"},{"product_id":"kent-furukawa-fx35a-lower-bushing","title":"Kent\/Furukawa FX35A Lower Bushing","description":"\u003ch2\u003eOur Lower \u0026amp; Upper Bushing are a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eUpper and lower bushings are critical to keeping your hydraulic hammer running right. These bushings keep your point or chisel in place during work. Each bushing needs to be made to OEM standards to keep the correct profile and contours and correctly seat your working tool. When your lower or upper bushing is worn, your tool is not “Square” with the piston. This will lead to a cracked piston, cylinder damage and seal damage.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"IT-O","offers":[{"title":"Default Title","offer_id":47371293196458,"sku":null,"price":348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Indeco_HB27_lower_2_f0500136-9c15-45d5-b178-3955ee89851f.png?v=1756395010"},{"product_id":"kent-furukawa-fx35a-upper-bushing","title":"Kent\/Furukawa FX35A Upper Bushing","description":"\u003ch2\u003eOur Lower \u0026amp; Upper Bushing are a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eUpper and lower bushings are critical to keeping your hydraulic hammer running right. These bushings keep your point or chisel in place during work. Each bushing needs to be made to OEM standards to keep the correct profile and contours and correctly seat your working tool. When your lower or upper bushing is worn, your tool is not “Square” with the piston. This will lead to a cracked piston, cylinder damage and seal damage.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371301191850,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/125_2b46777b-cb5a-4803-b02b-3ba0168376d9.png?v=1756395207"},{"product_id":"kent-furukawa-fx35-diaphragm","title":"Kent\/Furukawa FX35 Diaphragm","description":"\u003ch2\u003eOur Diaphragm is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur Diaphragm are made to exacting specifications to Match OEM standards. A high quality Diaphragm is a must for any rebuilt hydraulic hammer. Your Diaphragm should resist high and low temperatures and also perform at its best performance in all cases. An inferior Diaphragm can wear out prematurely. Depending on the make and model of your hammer..\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371309580458,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/27_a8d920e4-1d9a-406c-a6c7-c06771c8bf56.png?v=1756395426"},{"product_id":"kent-furukawa-fx35a-diaphragm","title":"Kent\/Furukawa FX35A Diaphragm","description":"\u003ch2\u003eOur Diaphragm is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur Diaphragm are made to exacting specifications to Match OEM standards. A high quality Diaphragm is a must for any rebuilt hydraulic hammer. Your Diaphragm should resist high and low temperatures and also perform at its best performance in all cases. An inferior Diaphragm can wear out prematurely. Depending on the make and model of your hammer..\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371309842602,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/27_94dae598-24ec-4755-9002-60db1ff0f1c4.png?v=1756395433"},{"product_id":"kent-furukawa-fx35-piston","title":"Kent\/Furukawa FX35 Piston","description":"\u003ch2\u003eOur Piston is a direct fit for your Kent\/Furukawa FX35. The OEM part number is:\u003c\/h2\u003e\n\u003ctable width=\"100%\" style=\"height: 29.5972px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5972px;\"\u003e\n\u003ctd style=\"height: 19.5972px; width: 48.5964%;\"\u003eSerial Number\u003c\/td\u003e\n\u003ctd style=\"height: 19.5972px; width: 51.0439%;\"\u003ePart Number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 10px;\"\u003e\n\u003ctd style=\"height: 10px; width: 48.5964%;\"\u003e1001 ~ \u0026amp; up\u003c\/td\u003e\n\u003ctd style=\"height: 10px; width: 51.0439%;\"\u003e002307-110010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003eA piston is a cylindrical component that moves back and forth inside a cylinder, converting pressure into mechanical force. In hydraulic hammers, the piston is driven by hydraulic fluid to deliver powerful blows to break concrete, rock, and other materials.\u003cspan\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"IT-O","offers":[{"title":"Default Title","offer_id":47371333828778,"sku":"002307-110010","price":984.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/KentFurukawa_FX35_Piston.png?v=1759707916"},{"product_id":"kent-furukawa-fx35a-tool-retainer","title":"Kent\/Furukawa FX35A Tool Retainer","description":"\u003ch2\u003eOur Tool Retainers is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eA tool retainer has an important job, keeping your point or chisel in the hammer. A Tool retainer needs to be heat-treated properly or breakage can occur. Often times, your tool retainer should not need replacing unless you are blank-firing the tool. We recommend you keep this to a minimum to keep repair costs low. Mis-using the breaker by Blank-firing leads to broken tools, tool retainers, bushings, and other problems.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"IT-O","offers":[{"title":"Default Title","offer_id":47371354243242,"sku":null,"price":143.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/18_227cb83c-bb79-4347-bbb4-b93d8c147800.png?v=1756395903"},{"product_id":"kent-furukawa-fx35-side-bolt-complete","title":"Kent\/Furukawa FX35 Side Bolt Complete","description":"\u003ch2\u003eOur Side Bolt Complete is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eThe tie rods are designed to absorb the vibration stressors evenly. Tie rods also maintain hydraulic pressure between seals and other critical breaker parts. When the rods and nuts are torqued correctly, there should be minimal fatigue in the rod and nut threads.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371364499626,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Side_Bolt2_68057125-cbda-4f50-a04d-d052d56ac291.png?v=1756396097"},{"product_id":"kent-furukawa-fx35a-side-bolt-complete","title":"Kent\/Furukawa FX35A Side Bolt Complete","description":"\u003ch2\u003eOur Side Bolt Complete is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eThe tie rods are designed to absorb the vibration stressors evenly. Tie rods also maintain hydraulic pressure between seals and other critical breaker parts. When the rods and nuts are torqued correctly, there should be minimal fatigue in the rod and nut threads.\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371364860074,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/Side_Bolt2_c0eed653-4e0c-48f4-a202-28d4b0399391.png?v=1756396101"},{"product_id":"kent-furukawa-fx35a-seal-kit","title":"Kent\/Furukawa FX35A Seal Kit","description":"\u003ch2\u003eOur Seal Kit is a direct fit for your Kent\/Furukawa. \u003c\/h2\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur Seal kits are made to exacting specifications to match OEM standards. A high-quality seal kit is a must for any rebuilt hydraulic hammer. Your seal kit should resist high and low temperatures and also perform at its best in all cases. An inferior seal kit can wear out prematurely. Depending on the make and model of your hammer, your set kit may come with various size O-rings, packings, and caps..\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan data-mce-fragment=\"1\"\u003e********\u003c\/span\u003e .\u003c\/div\u003e\u003c\/div\u003e\u003cp\u003e \u003c\/p\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cdiv style=\"-en-clipboard: true;\" data-mce-style=\"-en-clipboard: true;\"\u003e\u003c\/div\u003e\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":47371376787626,"sku":null,"price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/ProductImages_d2b42b7c-84ef-4bfc-8cb3-317e7dcd5de5.png?v=1756396292"},{"product_id":"kent-furukawa-nitrogen-kit-fx-series","title":"Kent\/Furukawa Nitrogen Kit (FX Series)","description":"\u003cp\u003eNitrogen Charging kits are used when a hammer is torn down and rebuilt, or has been discharged intentionally. Setting the correct nitrogen pressure is critical to proper functioning of your hammer. Incorrect pressure settings can lead to irregular\/erratic blows, lack of power, or no striking at all.\u003c\/p\u003e\n\u003cp\u003eEach model hammer has a different nitrogen setting, so be sure to check your hammer manual and adjust accordingly.\u003c\/p\u003e\n\u003cp\u003ePlease note that the regulator is not included in the package.\u003c\/p\u003e\n\u003cp\u003eOur Charging kit charges the Kent\/Furukawa for FX Series.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003eOur tools are crosses to Kent\/Furukawa Part Numbers \u003cspan\u003eBM-21805\u003c\/span\u003e.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"-en-clipboard: true;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"US-J","offers":[{"title":"Default Title","offer_id":47556584145066,"sku":null,"price":679.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/KentFurukawa-Nitrogen-Kit.jpg?v=1693992882"},{"product_id":"kent-furukawa-fx35-top-damper","title":"Kent\/Furukawa Fx35 Top Damper","description":"\u003ch2\u003eOur Top Damper is a direct fit for Kent\/Furukawa FX35. The OEM part numbers are:\u003c\/h2\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSerial Number\u003c\/td\u003e\n\u003ctd\u003ePart Number \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1001 AND UP\u003c\/td\u003e\n\u003ctd\u003e002307-880060\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eA hydraulic hammer buffer plays a crucial role by absorbing the high-impact forces generated during operation. Without a properly designed buffer, excessive vibration and stress can damage internal components, increase downtime, and raise operating costs.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cp\u003eBig Hammer Co. is a direct replacement manufacturer for all the brands we sell. Big Hammer Co. is not endorsed or sponsored by, or in any way associated with Kent\/Furukawa. This product is an aftermarket part.\u003c\/p\u003e\n\u003cp\u003eAny use of or reference to the Kent\/Furukawa trademark is for the sole purpose of indicating compatibility or product fit, and is not meant to imply any affiliation or relationship between Big Hammer Co and Kent\/Furukawa and\/or the Kent\/Furukawa Trademark.\u003c\/p\u003e","brand":"TBD","offers":[{"title":"Default Title","offer_id":48032694337706,"sku":"002307-880060","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/0497\/3401\/files\/KentFurukawa_Fx35_Top_Damper.png?v=1772502211"}],"url":"https:\/\/www.bighammerco.net\/collections\/kent-furukawa-fx35.oembed","provider":"Big Hammer Co","version":"1.0","type":"link"}